logo-quickdraw

Quickdraw Systems is a global provider of material handling, motion control, and custom manufacturing solutions. Their patented, low profile, open center, slip roller design can easily be integrated with an endless array of systems. This flexible design is ideal for conveyance in clean-room environments, automotive component assembly, medical device and instrument assembly, microelectronics production and semiconductor applications.

Product Solutions

MR-Series-Conveyors

Designed for factory automation and robotic assembly, the MR Series features an open center, slip roller design for accumulation, and precise product movement.

  • Speed is variable up to 90 fpm (27m.min)
  • Maximum weight – 40 lbs (18kg)
  • Conveyor lengths from 6 to 60 inches (15 to 152cm)
XR-Series-Conveyors

The XR Series bridges the capacity gap between the Quickdraw® MR Series and HD Series, and is easily configured and integrated into new or existing production lines.

  • Speed is variable up to 90 fpm (27m.min)
  • Maximum weight – 120 lbs (54kg)
  • Conveyor lengths up to 120 inches (305cm) in 1.5 inch increments
HD-Series-Conveyors

The HD Series conveyor is designed for heavy-duty applications. It works with most framing extrusion brands and has a compact profile. A gear motor directly drives each roller rail, eliminating the rail-to-rail drive shaft and permitting easy width adjustments to handle different size products

  • Speed is variable up to 90 fpm (27m.min)
  • Maximum weight – 400 lbs (181kg)
  • Conveyor lengths up to 120 inches (305cm) in 2 inch increments
Edgebelt-Conveyor

Quickdraw® Belt Edge Conveyors are specifically designed for transporting PCBs, BGA flex arrays, MCMs, and ceramic substrates with electronic assembly, test, and inspection equipment.

  • Speed is variable up to 90 fpm (27m.min)
  • Maximum weight – 10 lbs (4.5kg)
  • Conveyor lengths up to 58 inches (147cm)
product elevator

The Product Elevator offers the flexibility of variable infeed and outfeed heights. The shuttle conveyor may be any Quickdraw® conveyor length up to 30 inches. The elevator includes a metering stop and product sensor controlled by a PLC in the control enclosure. The shuttle conveyor is raised and lowered by a pneumatic rodless cylinder

enclosed elevator

The Enclosed Lift Elevator is designed for over/under assembly lines. It consists of a metering device at the infeed position, a powered infeed conveyor, a powered lift (carrier size) conveyor, and a vertical actuator that raises or lowers the lift to the outfeed conveyor.

corner rotate

The Corner Rotate is an Quickdraw® conveyor on an independent frame mounted on a swivel base. The rotating conveyor is actuated by a pneumatic cylinder. Metering stops are positioned on the outfeed end of the incoming conveyor and the rotating conveyor.

lift and rotate

The Lift and Rotate unit places the product in the orientation required by the operator or process equipment. It consists of a push/pull pneumatic cylinder with product detect sensor, a rotary pneumatic cylinder with two position sensors, and a lift pad that contacts the product or carrier. The unit mounts easily to the bottom of the conveyor rails.

pallet pusher

The Pallet Pusher moves product from one lane of the conveyor to another. It consists of a pneumatically actuated push-plate with safety springs or shocks to eliminate hazards to the product and operator. The conveyors operate the same as standard conveyors but have machined rail clearance for shuttling product across the top of the rollers.

shuttle

The Shuttle moves product from one lane to another, parallel lane. This can be an adjacent return lane, a lane shift, or converging or diverging lanes (e.g. one lane into two or two lanes into one). It consists of a shuttle conveyor mounted to a pneumatic actuator.

MR diverter

The MR Diverter transfers the product or carrier off the conveyor. It may be used, for example, to divert failed product into a reject bin or divert the product to another conveyor lane, special machine operation, or workstation. The diverter includes a pneumatic lift, motor-driven belt transfer, a product sensor, and two position sensors. It attaches easily to the bottom of MR conveyor rails.

Tools & Downloads


Videos

MS Series Diverter
Microplate Conveyor
Conveyor Elevator


Quickdraw Systems delivers industry-leading clean and modular automation solutions through its line of proprietary material handling and custom motion-controlled products. Contact Gibson Engineering to get started with Quickdraw conveyors today!